ShutterShack.com Interior Shutters
 
Radiator Covers
Forced Air Registers & Grills
Exterior Shutters
View our Vinyl Interior Shutters
View our Basic Wood Shutters
View our Premier Wood Shutters
View our Specialty Shutters
View our Shutter Kits
Glass Block Shutters
Security & Hurricane Shutters
Exterior & Interior Shutter Hardware
Solar Shades
Sheerweave Shades
Motorized Products
Porch Shades
Folding Doors
Custom Table Pads
Flower Boxes
Blinds/Cornices
Outdoor Products
Room Dividers

Shutter Shack featured on CBS Early Show w/ Danny Lipford

WCBS 880

Visit Long Island Portal

Visit Hunter Douglas Online
Visit Comfortex Online
Shutter Shack Franchise Opportunity


Follow Us on TwitterShack BlogLike US on FaceBook

Interior Shutters: Measuring
break


Inside Measure
Outside Measure


Width: Using a wood or steel measure, measure the exact distance between the window opening at two points
(as shown). Record the narrowest dimension.

Height: Measure the exact distance from the sill to the inside edge of the top casing at two points (as shown). Record the shortest dimension.

Divider Rail: Measure the height of the divider rail from sill to the top of the divider rail. Use a divider rail on panels over 36" in height.

 


Width: Using a wood or steel measure, measure the exact distance between the hinging points at two points (as shown).

The Shutter: (Including Hanging Strips) Must extend a minimum of 3/4" beyond the inside opening on each side, a total minimum of 1-1/2". This is necessary if using a side-mount hanging strip.

Height: Measure from the sill to a height that gives the same amount of overlap on the top casing as you have on the side casings, at two points (as shown).

Divider Rail: Measure the height of the divider rail from the sills to the top of the divider rail. Use a divider railon panels over 36" in height.

Framed Outside Installation: Please provide exact measurements from outside of frame

 


Basic Wood DIY Shutter Kits Faux Wood DIY Traditional 1 1/4" and Plantation 2 1/4" Shutter Kits

Actual Size
Width X Height

Minimum Trimmed Size
Width X Height
24" X 20"
24" X 24"
24" X 28"
24" X 32"
24" X 36"
24" X 40"
20 1/4" X 16"
20 1/4" X 20"
20 1/4" X 24"
20 1/4" X 28"
20 1/4" X 32"
20 1/4" X 36"
28" X 20"
28" X 24"
28" X 28"
28" X 32"
28" X 36"
28" X 40"
24 1/4" X 16"
24 1/4" X 20"
24 1/4" X 24"
24 1/4" X 28"
24 1/4" X 32"
24 1/4" X 36"
32" X 20"
32" X 24"
32" X 28"
32" X 32"
32" X 36"
32" X 40"
28 1/4" X 16"
28 1/4" X 20"
28 1/4" X 24"
28 1/4" X 28"
28 1/4" X 32"
28 1/4" X 36"
36" X 20"
36" X 24"
36" X 28"
36" X 32"
36" X 36"
36" X 40"
32 1/4" X 16"
32 1/4" X 20"
32 1/4" X 24"
32 1/4" X 28"
32 1/4" X 32"
32 1/4" X 36"
40" X 20"
40" X 24"
40" X 28"
40" X 32"
40" X 36"
40" X 40"
36 1/4" X 16"
36 1/4" X 20"
36 1/4" X 24"
36 1/4" X 28"
36 1/4" X 32"
36 1/4" X 36"
44" X 20"
44" X 24"
44" X 28"
44" X 32"
44" X 36"
44" X 40"
40 1/4" X 16"
40 1/4" X 20"
40 1/4" X 24"
40 1/4" X 28"
40 1/4" X 32"
40 1/4" X 36"
48" X 20"
48" X 24"
48" X 28"
48" X 32"
48" X 36"
48" X 40"
44 1/4" X 16"
44 1/4" X 20"
44 1/4" X 24"
44 1/4" X 28"
44 1/4" X 32"
44 1/4" X 36"

Listed Width
No Filler Strips

Inside Mount Size
Minimum/Maximum
Outside Mount Size*
Maximum
23"
27"
29"
31"
35"
39"
23" to 25"
27" X 29"
29" X 31"
31" X 33"
35" X 37"
39" X 41"
20.5"
24.5"
26.5"
28.5"
32.5"
36.5"



* Outside Mount Size is the maximum size of the window the actual shutter width will be the listed size.

Our Traditional 1 1/4" DIY Shutter Kit Panels may be trimmed up to 3/4" inch on the top and 1 1/2" inches on the bottom.

Our Plantation 2 1/4" DIY Shutter Kit Panels may be trimmed up to 1/4" inch on the top and 1 1/2" inches on the bottom.

* Inside Mount minimum recommended depth: Plantation is 1 1/2" and Traditional is 1 1/4"

 



BassWood DIY Traditional 1 1/4" Shutter Kits

Listed Width
No Filler Strips

Inside Mount Size
Minimum/Maximum
Outside Mount Size*
Maximum
23"
27"
29"
31"
33"
35"
23" to 25"
27" X 29"
29" X 31"
31" X 33"
33" X 35"
35" X 37"
20.5"
24.5"
26.5"
28.5"
30.5"
32.5"



* Outside Mount Size is the maximum size of the window the actual shutter width will be the listed size.

Our Traditional 1 1/4" DIY Shutter Kit Panels may be trimmed up to 3/4" inch on the top and 1 1/2" inches on the bottom.

* Inside Mount minimum recommended depth is 1 1/4"

 

Any questions, or if you have a specific situation, please call or email us

Tape Measure

© Shutter Shack Inc.  Sitemap