|
Radiator
Covers: Measuring
RADIATOR
COVER MEASURING INSTRUCTIONS
Width:
Measure beyond pipes and valves on both ends. Choose width
that gives you enough room for fit and balance.
Height: Measure from floor to top of radiator.
Add at least one inch and choose nearest standard height to
fit.
Depth: Leave ample room both in front and
in back of radiator - choose depth which is larger than radiator.
Make certain
that enclosures can be slipped over the top. If radiator is
recessed, give height of radiator and height of bottom sill
or opening, and we will make suitable back-apron to slip in.
We can also make the unit without a back for ease of installation.
However, we do not suggest a tight fit for recessed or semi-recessed
radiators.
Add at least 2" or more to the existing width of your
radiator.
Add at
least 1" or more to the existing height of your radiator.
Add at
least 1" or more to the existing depth of your radiator.
(2" for Oxford, Cambridge, Newport, Eton)
When floor
is uneven order with adjustable legs.
On enclosures
over 34" high, we can at no additional cost provide you
with a valve door if desired. Advise us which side your valve
is located.
We will
automatically add 3/4" more in length when completed
and 1/2 more in height and depth.
NOTE:
If you need your enclosure an exact size, or have any cutouts
you may need for pipes or moldings, please use our Radiator
Diagram sheet to provide us with your measurements.
Click
here for our "SKETCH SHEET"
Print
it and fax to us at 516-367-6460.
If
you HAVE any questions, please contact us at 516-367-6460
Or toll free at 877-913-3100
|
